FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister   ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

  ads
Temp gauge not working T25 diesel

 
Post new topic   Reply to topic     Forum Index -> Other Forms Of Power
View previous topic :: View next topic  
Author Message
andymacdonald30
Initiate Jedi
Initiate Jedi


Joined: 18 Jun 2008
Posts: 48

PostPosted: Wed Jul 16, 2008 7:32 pm    Post subject: Temp gauge not working T25 diesel Reply with quote

Hi there
My temp gauge is not working on my T25 pug diesel engine conversion

The previous owner had fitted the VW temp sender into the pug temp sender housing and it has a brown and a brown/yellow wire attached to the sensors on the thermostat housing
All seems to be ok but it still does not work
I have tested the sender unit with a multi meter and it gives approx 400ohms when cold and 120 ohms when dipped in my cup of tea
Does this sound right or should I just get a new one
Also what colour wire is connected to the sensor from the original VW loom?

Any help would be much appreciated

Andy
_________________
2002 T4 2.5 tdi
1987 T25 1.9 D
Back to top
View user's profile Send private message
13 window deluxe
Jedi Guardian
Jedi Guardian


Joined: 22 Dec 2006
Posts: 861
Location: chesterfield derbyshire

PostPosted: Wed Jul 16, 2008 8:28 pm    Post subject: Reply with quote

vw coolant temp wire colour should be a yellow or yellow/red wire depending on year, short the wire to earth and the gauge should go in to the red if not its the wiring or clocks
_________________
1964 rat 13 window deluxe 1Z tdi,
1975 rhd twin slider tintop (TBA)
1991 golf 2 gti with tweaked AHU tdi,

previous tdi swaps: gone but not forgotten
1979 rhd twin slider tintop bay ahu 1.9tdi
1990 T25 1Z 1.9tdi
1993 suzuki samurai with 1Z 1.9tdi
Back to top
View user's profile Send private message
ElusiveStranger
Darth Admin
Darth Admin


Joined: 23 May 2006
Posts: 2527
Location: Mudway, Kent

PostPosted: Wed Jul 16, 2008 10:13 pm    Post subject: Reply with quote

Generally temp senders go from a couple of K ohms (cold) to a couple of hundred ohms at 100°C

I can't be too specific as they all vary.
_________________
The advice you receive on here is worth the paper it's written on.
Your experiences are worth shed loads to others, including the f'ups - live and learn.
Wouldn't YOU rather learn by someone else's mistakes? So would they.

'78 Bay, 2 litre 091 box, EJ20 NA & the ashtray's on the 'right' side.
I don't lean forward for hills any more Grin
Bugger, missed out on "Live fast, die young"
Back to top
View user's profile Send private message
andymacdonald30
Initiate Jedi
Initiate Jedi


Joined: 18 Jun 2008
Posts: 48

PostPosted: Thu Jul 17, 2008 5:48 pm    Post subject: Temp gauge not working T25 diesel Reply with quote

Well I tried all the wires but none of them make the temp gauge move
So I think that the gauge may be broken
I will have to get the multi meter out and start to check the wires out to see if there are any faulty bits.

But I will have to get a new temp sender unit as the one that was in there I managed to snap in half.

But cheers chaps the info was very useful.

Andy
_________________
2002 T4 2.5 tdi
1987 T25 1.9 D
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Other Forms Of Power All times are GMT
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group
NOT SO
SHABBY
INTERIORS
CLICK ME



ads

VanMonst

VWHERT



NOT SO
SHABBY
INTERIORS
CLICK ME



ads


ads

ads


CarBuilderSolutions





ads