| View previous topic :: View next topic |
| Author |
Message |
cali red
Padawan
Joined: 15 Sep 2007
Posts: 89
Location: JERSEY
|
 Posted: Thu Sep 30, 2010 5:26 pm Post subject: Connecting vss wires to ecu |
 |
|
| Ive just fitted RJES vss to speedo and run wires back to ecu ,the vss wire was labeled but there is a red /blue wire and a black/white wire from the ecu . I just want to know if they go to the red and the black vss wires. |
|
| Back to top |
|
 |
james72
Initiate Jedi
Joined: 01 Mar 2009
Posts: 49
Location: South Devon
|
| Posted: Fri Oct 01, 2010 12:20 pm Post subject: |
|
|
The other 2 wires on the vss are, red ign + and black ground, just the check the ecu wires with a multimeter to make sure the are + and -. if not you can wire them to any ign+ or ground. My ign+ is connected to a spare connector on the back of the fuse box and the earth to the nearby earthing point.
_________________
1989 VW Magnum Multivan EZ30 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
