| View previous topic :: View next topic |
| Author |
Message |
megabus Force Sensitive

Joined: 25 Nov 2014 Posts: 13 Location: bromsgrove
|
Posted: Wed Sep 06, 2017 8:58 pm Post subject: Golf gti into 71 bay. |
|
|
| When I fit the golf engine with alternator ,do I need the camper voltage regulator as fitted to the 71 loom.As I'm fitting a new loom to the camper and want to keep it as simple as poss.If I do need the voltage regulator how will it connect to the new stuff .Thanks . |
|
| Back to top |
|
 |
Wilfred Darth Admin

Joined: 13 Nov 2013 Posts: 366
|
Posted: Thu Sep 07, 2017 10:19 am Post subject: |
|
|
The GTI most likely has an integrated voltage regulator. so you don't need the original regulater.
Jus connect the big wire from the alternator to your battery. that's it.
The alternator also needs a 12v feed, but that is most likely integrated in the GTI loom. If this feed is lacking, the alternator will turn but not start charging.
Check by measuring the voltage when the engine runs. Should be around 14V. _________________ 1973 BayWindow running 1.9 110 bhp TDI with flipped gearbox. |
|
| Back to top |
|
 |
megabus Force Sensitive

Joined: 25 Nov 2014 Posts: 13 Location: bromsgrove
|
Posted: Sat Sep 09, 2017 9:29 am Post subject: gti into 71 bus |
|
|
| next problem is ecu,how to get around immobiliser,is there a different one I could use or is the only way to have it removed.I didn't get the little black box off the donor car oops,so can't use it. thanks Ian |
|
| Back to top |
|
 |
Wilfred Darth Admin

Joined: 13 Nov 2013 Posts: 366
|
Posted: Sun Sep 10, 2017 10:00 pm Post subject: |
|
|
I would just have it removed. Just 50 euro over here, so 40 britisch pound? _________________ 1973 BayWindow running 1.9 110 bhp TDI with flipped gearbox. |
|
| Back to top |
|
 |
megabus Force Sensitive

Joined: 25 Nov 2014 Posts: 13 Location: bromsgrove
|
Posted: Sun Sep 24, 2017 5:27 pm Post subject: How can I get around the tranny speed sensor problem |
|
|
| Not sure if my 95 gti mk3 agg engined golf donor car had sensor,I think it did.Because something is stopping it starting and I believe that it won't start without it connected.What can I do to get it running,any help much appreciated.cheers Ian |
|
| Back to top |
|
 |
Kai Jedi Guardian


Joined: 14 Nov 2008 Posts: 1226 Location: Village life.... Enter the Vale
|
Posted: Fri Sep 29, 2017 1:05 pm Post subject: |
|
|
If you haven't the immobiliser items then buy this.
https://www.ebay.co.uk/i/272860766126
Or contact that guy Bartek on eBay and get him to de-immobilise you current ECU.
If you look up AFN tuning ECU something like that you'll find the guy. He's based in redhill surrey. _________________ Think......
Don't sleep and drive!!! |
|
| Back to top |
|
 |
illzlee Jedi Master

Joined: 07 Jul 2006 Posts: 282 Location: Derby, youth.
|
|
| Back to top |
|
 |
|