t25 project over 10 years in the barn !!

famous phil

well i've started to get her sorted , new years res not to buy any more till i sort the ones out that i have !!!!! till another bargain

this pic on roll frame , took a bit to get her over , o and the r send of youthy G's new ride blue t25 , thats him in the pic by the way , Grin

but was easy to was the wax off uderneath so that i could repaint

you can just make out the roll frame , and water pipes
_________________
Auto Union Munga Jeep ,T4 2.4td , T4 2.5tdi ,Mercedes S Class on LPG , 66 splity deluxe , GP mk1, 3 type 25s 1 with 1.9dt pug engine + 1 with N/A pug engine ,,there are 6 t25s with pug power in Darlington

famous phil · Posted: Sun Jan 28, 2007 11:35 pm Post subject:

done some more work today
just put this below was just stuck on my porche injectors http://www.porsche-diesel.com/restoration.htm

wet flating very laborious Happy

youthy was busy as well

my rear arch now 'what do you think of that now covin

_________________
Auto Union Munga Jeep ,T4 2.4td , T4 2.5tdi ,Mercedes S Class on LPG , 66 splity deluxe , GP mk1, 3 type 25s 1 with 1.9dt pug engine + 1 with N/A pug engine ,,there are 6 t25s with pug power in Darlington

famous phil · Posted: Thu Feb 15, 2007 11:17 pm Post subject:

got some more done slow work this painting ,
cant wait to rebuild ,
painted in L90D pastel white

replaced this wheelarch as paint was damaged before it went into the barn over 10 years ago , was rusty on the outer edge so i got a new arch and cut it up and replaced just the outer edge , this way the seam has not been touched

doors to do next

_________________
Auto Union Munga Jeep ,T4 2.4td , T4 2.5tdi ,Mercedes S Class on LPG , 66 splity deluxe , GP mk1, 3 type 25s 1 with 1.9dt pug engine + 1 with N/A pug engine ,,there are 6 t25s with pug power in Darlington

famous phil · Posted: Thu Feb 15, 2007 11:26 pm Post subject:

just found the pic of the rear arch , the weld ground up that well it hardly needed any filler

_________________
Auto Union Munga Jeep ,T4 2.4td , T4 2.5tdi ,Mercedes S Class on LPG , 66 splity deluxe , GP mk1, 3 type 25s 1 with 1.9dt pug engine + 1 with N/A pug engine ,,there are 6 t25s with pug power in Darlington

13 window deluxe · Posted: Sun Feb 18, 2007 9:13 pm Post subject: arch

did the same to mine but used the roller attachment on the single sided spot welder at work to weld on no grinding what so ever no distortion and very little filler

Covin · Posted: Wed Feb 21, 2007 3:53 pm Post subject:

famous phil · Posted: Sat Feb 24, 2007 10:10 pm Post subject: Re: arch

famous phil · Posted: Sun Mar 04, 2007 10:27 pm Post subject:

nearly got all the paint done , its time to put it back together now ,,,,, ,,,,,,,

pic of the dash back in , no messed about wires here its never even had a radio , still got the cover in place

doors back on , think next job will be to put the engine bay wires back in, then windows in

_________________
Auto Union Munga Jeep ,T4 2.4td , T4 2.5tdi ,Mercedes S Class on LPG , 66 splity deluxe , GP mk1, 3 type 25s 1 with 1.9dt pug engine + 1 with N/A pug engine ,,there are 6 t25s with pug power in Darlington

Covin · Posted: Sun Mar 04, 2007 11:08 pm Post subject:

Coming on well there Phil, looking good m8

You don't happen to have any old air-cooled motors or parts going cheap do you ? I'm after some for a bit of experimental work Grin

_________________
DARREN

I LOVE RUST ME
Patent Pending "The Ultimate In Rust Remedy"

www.vwbaywindow.co.uk - - www.covin.co.uk - - www.flat4dubs.co.uk

famous phil · Posted: Sun Mar 04, 2007 11:18 pm Post subject:

cheers for that covin been getting lots of nagging from the other half but fingers crossed should come on leaps & bounds now

not sure if i have any spare lawn mower lumps at the mo , but will have a look , what might you be after ,,,,,,,,,,,,,,,,,,

_________________
Auto Union Munga Jeep ,T4 2.4td , T4 2.5tdi ,Mercedes S Class on LPG , 66 splity deluxe , GP mk1, 3 type 25s 1 with 1.9dt pug engine + 1 with N/A pug engine ,,there are 6 t25s with pug power in Darlington

Covin · Posted: Sun Mar 04, 2007 11:28 pm Post subject:

Nagging from the other half is all part of the Pain.. I mean Joys of rebuilding Buses m8

I'm after any lawn mower bits really, cases, heads, short motors etc, prefer T1 but T4 would do... I'm wanting to try and make some engine machining bits for my lathe and milling machine so need some testing parts cheap or free

.... It might work, then again it might not

_________________
DARREN

I LOVE RUST ME
Patent Pending "The Ultimate In Rust Remedy"

www.vwbaywindow.co.uk - - www.covin.co.uk - - www.flat4dubs.co.uk

famous phil · Posted: Mon Mar 05, 2007 10:52 pm Post subject:

I'm after any lawn mower bits really, cases, heads, short motors etc, prefer T1 but T4 would do... I'm wanting to try and make some engine machining bits for my lathe and milling machine so need some testing parts cheap or free

.... It might work, then again it might not

[/quote]

might after explain a bit more

you wanting to mill a block out for stroker crank , or fly cut the heads
_________________
Auto Union Munga Jeep ,T4 2.4td , T4 2.5tdi ,Mercedes S Class on LPG , 66 splity deluxe , GP mk1, 3 type 25s 1 with 1.9dt pug engine + 1 with N/A pug engine ,,there are 6 t25s with pug power in Darlington